Description
Bond-it High Strength Brick Acid
First of all Bond-it High Strength Brick Acid is super strength (16% hydrochloric acid) cleaner. Furthermore, will remove cement and mortar splashes from brickwork, paving, concrete floors, and warehouses.
Also, for removing cement and mortar splashes, light oil stains, and grease from brickwork, paving, tiles, earthenware, and concrete.
In addition, this cleaner should not interfere with the various types of concrete and stone (except limestone and marble) commonly encountered in the general building area.
Finally, Efflorescence can also be removed by using this product diluted.
APPLICATION
First of all, this product is highly corrosive and therefore tests a small area prior to application.
Therefore this product should be diluted to recommended levels before use.
Furthermore, this Acid should be applied by brush and allowed to stand for 10-15 minutes. However, do not allow it to dry out.
After that, scrub with a stiff brush then rinse thoroughly with a hose pipe.
In addition, this product can be used undiluted for stubborn stains.
Above all most importantly note that this product will attack limestone, marble, stainless steel, and aluminum.
Limitations
First of all, do not use it on limestone or marble as the chemicals will attack the surface. Furthermore, this product can also have an adverse effect on colored concrete, test an inconspicuous area before use. Similarly Brick Acid and its fumes will attack limestone, marble stainless steel, and aluminum. Above all, if used internally extreme care should be used and thorough ventilation provided. Therefore do not allow products to come into contact with metals such as steel, copper, aluminum, and titanium. In conclusion, if used internally, extreme care must be taken and thorough ventilation provided as fumes can cause damage to sensitive surfaces.
